shower door seals and sweeps

47 views

shower-door-seals-and-sweeps shower door seals and sweeps

shower door seals and sweeps – If you’re contemplating changing your shower you may well have looked around a couple of bathroom shops and been amazed by the amount of alternatives you have. Even picking a shower enclosure can be a tricky business so here’s a guide to let you know what is what when it comes to showers.

This is the most basic type of shower. Most manual showers possess one lever control that you use to control the flow of the water and the temperature. They are extremely simple to use and usually are not expensive.

The excellent benefit of a thermostatic shower enclosure is that it can provide a constant, even temperature and cope with fluctuations in the flow and temperature of their warm and cold water feeds. Most thermostatic valves possess additional anti-scald safety features and will reduce the flow of water when the cold water supply fails.

Concealed / Exposed describes the way in which the shower enclosure is mounted on the wall. A hidden shower enclosure is built into the shower wall so that the majority of the valve is hidden, and just the control levers are visible. An exposed valve is mounted onto the shower wall so that the whole mechanism is visible. Many shower valves can be mounted either exposed or hidden.

Unlike one lever valve, a twin valve has two controls, one controls for its rate of water flow and another control for the water temperature.

A triple valve has three controls; one for the water flow, one for the warmth and a third that is usually a diverter. The diverter is useful in case you have two shower heads. It is becoming more common to have a fixed shower head over the shower and a hand-held shower head as well. The diverter on a triple shower enclosure lets you select that shower head water is fed to.

Sequential Shower Valves

This is one we get a lot of questions about. A sequential valve has one lever that works rather like the knob on your own stove. When the lever is fully anti-clockwise the shower is off. As you rotate the lever it turns out the shower turns on. With a sequential valve “on” signifies fully on so you have complete pressure straight away. As you rotate the lever further you raise the warmth of this water.

A recent newcomer is the shower stall or shower tower. This is one unit that contains everything you will need for a stunning shower. Specifications vary but usually include a shower enclosure (often thermostatic), a diverter, a fixed shower head, a hand held shower and several body jets. Shower panels are simple to install but can require quite high water pressure to operate nicely so you may want to install a shower pump as well.

These days, shower components are standardized enough you could pretty much pick and choose the parts you wish to produce the shower of your dreams. You can choose from hundreds of shower valves, diverters and stop valves, have multiple heads, ceiling mounted heads, riser rails, stiff risers or body jets to construct precisely the shower you need, individual and customized to your own needs. After all, how else are you going to get a shower with 16 jets and a 12 inch shower heads?

Electric showers heat the water as it passes through the shower so that they only require a cold water supply so you have more easy plumbing and do not require any warm water to conduct them. Electric showers are especially popular in en-suites.

Power Showers

A power shower is basically a shower with a built in pump. A power shower needs both cold and hot water supplies. A power shower does not heat the water ; it pumps water through and enhanced water pressure, providing you with a stronger shower. Power showers are ideal in which you have low water pressure, perhaps in a bungalow.

So there you have it. Not quite everything you need to know about showers, however a fantastic start!

Originally posted 2017-06-09 16:11:21.

Leave a reply "shower door seals and sweeps"

Author: 
    author